4
Dust Bin
The standard dust bin is located below the hopper to collect dust removed from the air stream. The dust bin is sealed to the hopper
discharge with a convenient clamping arrangement which lifts the dust bin against a sealing gasket on the base of the hopper to
ensure a dust tight seal during operation.
Fan and Motor
The fan and motor assembly is
located near the base of the collector to increase stability by lowering the collector's center of gravity. The fan/motor chamber is
lined with acoustical foam and is designed in combination with the exhaust plenum to reduce average operational sound pressure
levels below 80 dBa (at distances up to 1 meter from the DFEP).
operation.
Compressed Air Connection
compressed air line upstream of the collector.
pulse cleaning cycle is active.
Sprinkler Tap
To Next Page
Loading...
