Donner DDP-200 - Piano Assembly; Electrical Piano Overall Assembly

PIANO ASSEMBLY
Electrical Piano Overall Assembly
Before you are ready to assemble the piano, please check if all parts are included in the package box.
A. Use screws (M6x30) to fix the pedal box onto the left and right stand boards. (Make sure the direction is
correct before installation.) Then install the anti-tilt corner bracket, the installation of corner brackets can
be carried out according to your needs.
1
2
4
7
5
3
6
Piano Body
Back Plate
Screw M6X30 (14PCS+2PCS For Replacement)
1
4
7
Left Stand Board
Pedal Box
2
5
Right Stand Board
Corner Bracket
3
6
0101