Donner DDP-300 - Piano Demo Playback; Reverb Effect Settings; Adjusting Reverb Depth; Tone Pitch Adjustment

l The piano is built-in 5 beautiful piano demos. (See Appendix for details-
Piano Demo.)
l Press DEMO【 】 button firstly. Play/Pause the piano demo. At this
time, it will loop all the demos.
l Press【 】 to cyclically switch demos.
l Press [FUNCTION] while press [ #G-C ] key to enter/exit the state of playing
the corresponding demos. At this time, it will loop the current demo.
DEMO
#G
1
C
FUNCTION
l The piano has 4 reverb Effect. Through adjusting reverb effects, it can achieve the effect of
playing in different occasions.
l The default setting of reverb Effect is Hall 1.
l Press [FUNCTION] and [ #C ], to turn OFF/ON Reverb Effect.
l Press [FUNCTION] and [ D-F ], to choose Reverb Effect.
Key
#C
D
#D
E
F
l Adjust reverb depth, range: 0~127.
l Press [FUNCTION] and [ #F ], reverb depth value -1.
l Press [FUNCTION] and [ #G ], reverb depth value +1.
l Press [FUNCTION] and [ G ], return to reverb depth default value
(depend on reverb types).
F
FUNCTION
#C
FUNCTION
#F（-1）
#G（+1）
G
（RecoveryStandard）
l Slightly adjust the standard tone of the whole keyboard to
match other music equipment.
l Adjustable range: 415.3Hz~466.2Hz. Default value: 440Hz.
l Press [FUNCTION] and [ A ], tone -, decrease the overall pitch in
0.2Hz.
l Press [FUNCTION] and [ B ], tone +, increase the overall
pitch in 0.2Hz.
l Press [FUNCTION] and [ #A ], return to tone default value.
FUNCTION
A(-)
#A
（RecoveryStandard）
B(+)
Function Introduction
Piano Demo
Reverb Effect
Reverb Effect
OFF/ON
HALL 1
HALL 2
STAGE 1
STAGE 2
Reverb Depth
Tone Setting
09