dooch Q-Drive NQ-0750-T - Corresponding Freq. to I1; V1 Max Input Voltage; V1 Min Input Voltage

[CHAPTER 6 FUNCTION TABLE & DESCRIPTION]
6-22 | DOOCHPUMP
dr-56 Ambient Temperature Display
ㆍ It displays ambient temperature of the drive.
Range
0~200
℃
dr-57 Output Voltage Display
ㆍ It display effective output voltage of the drive.
Range 0.0~500.0[V]
dr-60 ~ dr-67 Command Frequency Setup upon External Analog Input
Parameter No. Function Name Functional Description
dr-60
V1 Min Input
Voltage
To set up min voltage to be input from external.
dr-61
Corresponding
Freq. to V1 Min
Input Voltage
To set up frequency corresponding V1 min input
voltage
dr-62
V1 Max Input
Voltage
To set up max voltage to be input from external.
dr-63
Corresponding
Freq. to V1 Max
Input Voltage
To set up frequency corresponding V1 max
input voltage.
dr-64
I1 Min Input
Current
To set up min current to be input from external.
dr-65
Corresponding
Freq. to I1 Min
Input Current
To set up frequency corresponding I1 min input
current
dr-66
I1 Max Input
Current
To set up max current to be input from external.
dr-67
Corresponding
Freq. to I1 Max
Input Current
To set up frequency corresponding I1 max input
current.
dr-53~dr-54 Indication of Accumulated Power
ㆍ It displays accumulated power of drive in Mega, kilo Wh unit.
Displayed accumulated power may have error comparing to actual value.
Parameter Functional Description
To display in Mega Wh unitdr-53
To display in Kilo Wh unit dr-54
dr-55 Power Semiconductor Temperature
ㆍ It displays temperatures of core module devices in the drive.
ㆍ
If temperature is more than 100℃, It display alarm and stop.
Range
0~200 ℃