DoorBird D1101V User Manual

DoorBird Doorstation Driver
Compatible Control4 Systems:
OS 3.1 and above
Compatible Hardware:
All DoorBird models and configurations
D101(S), D2101V, D2101KV, D2101KH, D1101V
DoorBird Hardware Tips:
 Install the DoorBird according to the installation manual.
 The DoorBird can use Wifi or PoE (Preferred).
 The DoorBird must be on the same subnet as Control4 director.
 The DoorBird app should work BEFORE Control4 setup. Make sure you can view the
DoorBird camera and communicate to the unit via the DoorBird app prior to Control4
setup.
Overview
The Control4 Home Automation system can control nearly all aspects of a customer’s smart
home, including security. Security is extremely important for any homeowner, and smart
doorbells offer several features to maintain a safe and secure home. DoorBird is the industry
standard for smart doorbells, with top-of-the-line cameras, real-time notifications, and video
playback. Installing a DoorBird system in your customers’ home gives homeowners peace of
mind knowing that their property is protected. With the DoorBird driver, customers can easily
and conveniently see who is at the door, grant or deny access to their home by triggering a
smart lock, and play back surveillance video all in the Control4 interface.
In addition to the main features customers can receive alerts when motion is detected at the
door, when someone rings the doorbell, when a code is entered on the keypad (specific
models), and more. Icons show the states of the DoorBird, visually communicating that motion
has been detected, when the doorbell rings, if the doorbell has been silenced, and more.
DoorBird App Setup
1. Log into the DoorBird App

DoorBird D1101V Specifications

General

Material	Stainless Steel
IP Rating	IP65
Night Vision	Yes
Connectivity	Wi-Fi, Ethernet
Operating Temperature	-20°C to +50°C
RFID reader	125 kHz
Audio	Two-way
Camera	1080p
Power Supply	15 V DC or PoE (Power over Ethernet)

Summary

Overview of DoorBird Integration

DoorBird App Setup

Steps to install and configure the DoorBird app before integrating with Control4.

DoorBird Driver Setup and Configuration

Control4 Driver Setup

Steps for setting up the Control4 driver, including adding agents and connecting the DoorBird.

Control4 Proxies Overview

Explanation of Camera and Intercom proxies for Control4 integration.

Advanced Control4 Settings

Manual configuration of SIP server details for advanced Control4 setups.

UI Proxy Features

Using UI proxy for triggering actions like relays and displaying status.

Status and Alert Management

Features for displaying status and silencing alerts on Control4 touchscreens.

Notifications, Relays, and Events

Configuring Event Actions

Setting up actions like messages, intercom calls, push notifications, and announcements for events.

Navigator Event Display

Configuring popups on touchscreens for specific events with images.

DoorBird Event Triggers

Handling events such as doorbell presses, motion detection, and relay activations.

Custom Message Variables and Driver Actions

Utilizing Message Variables

Inserting driver-specific and composer variables into notification messages.

Driver Troubleshooting Actions

Actions for viewing status, simulating events, managing icons, and resetting the driver.

Control4 Push Notification Setup

Configuring Account and Notifications

Steps to configure Control4 accounts and notification preferences for MyHome devices.