2.6 Miscellaneous
2.6.1 Restore Defaults
This step will restore the factory set defaults for each of the programming parameters.
WARNING: Once started, this sequence will program all values to factory default.
1. Press * 9 0 and enter the MASTER CODE. [ * 9 0 _ _ _ _ (beep)]
2. Press 9 9 9 9 then press *. [ 9 9 9 9 * (beep)]
3. This sequence will end itself automatically. [beeeeeep]
Page 36 1812-161-E-1-10
To Next Page
Loading...
