1835-067-A-9-18
7
1.3 Enclosure Dimensions
Enclosure can be mounted directly to a wall, pilaster, post mounted using a OPTIONAL DoorKing architectural style mounting
post or recessed in a wall (OPTIONAL Flush Mount Kit). The OPTIONAL Hood can be mounted to enclosure if desired. Be sure
the unit is mounted securely and is not subject to vibration from closing doors or gates.
14.75”
3.75”
12.75”
WARNING! If this entry
system is used to control
a vehicular gate with an
automatic gate operator,
the entry system must be
mounted a minimum of
six (6) feet away from the
gate and gate operator, or
in such a way that a
person cannot operate the
entry system and touch
the gate or gate operator
at the same time.
OPTIONAL Flush Mount Kit (P/N 1814-200)
OPTIONAL Hood (Stainless Steel P/N 1814-180, Black P/N 1814-185)
Back View
Bottom View
3” 3”
10.125”
10.125”
1.125”
1.5”
1.5”
10.875”
10.875”
1.25” 1.25”
9”
9”
1.125” Dia
1.375” Dia
6”3.5” 3.5”
Trim RingRough-In Box
Rough-In
Box
Trim Ring
Enclosure
Hood
13.61”
15.34”
17.27” 13.08”
13.08”
14.88”
3.75” 3.76”
15.56”
5.61”
To Next Page
Loading...
