1835-067-A-9-18
9
Mount OPTIONAL DKS Self-Standing Lighted Kiosk
10”
18.5”
60”
The flush mount kit (Sold separately) is installed into the self-standing
kiosk (P/N 1200-???) to secure entry system in place.
Secure the rough-in box in the kiosk. Run all necessary wires to rough-in
box. Slide the trim ring into the rough-in box. Slide the enclosure in the
trim ring and secure them all together with hardware included in the kit.
Rough-In
Box
Trim
Ring
WARNING! If this entry
system is used to control
a vehicular gate with an
automatic gate operator, the
entry system must be
mounted a minimum of six
(6) feet away from the gate
and gate operator, or in
such a way that a person
cannot operate the entry
system and touch the gate
or gate operator at the same
time.
Enclosure
Locknut
Kno
ck-o
u
t
s
To Next Page
Loading...
