Transportation
Cautions during Transportation
※ When relocating the robot, have two or more individuals hold the link area of the robot.
※ The control box is moved by grasping the side handle.
Installation
Cautions during Installation
※ Before installing the robot, secure sufficient space and install the robot on a firm, even surface.
※ Check whether flammable and explosive materials are near the installation location.
Securing the Robot
※ Use M8 bolts in the four 9.5 mm holes in the robot base to secure the robot.
※ Tighten the bolts all the way to prevent loosening during robot operation. And it is
recommended to use a tightening torque of 20 Nm to tighten the bolts.
※ The robot will interpret robot base vibration as a collision and engage the emergency stop.
Connecting the Robot and Control Box
※ Push the robot cable connected to the robot into the corresponding control box connector until a
click is heard to prevent the cable from becoming loose.
※ For the details of the installation, refer to the installation manual.
To Next Page
Loading...
