Maintenance Section
154
Fuel Tank Filter Cap & Screen -
Clean
Park the lift truck with the forks lowered, parking
brake applied, transmission in neutral and the
engine stopped.
Typical Example
1. Raise the left side cover.
2. Remove the filter cap assembly. Separate the
cap from the screen. Clean both in clean,
nonflammable solvent.
3. Dry and assemble cap and screen.
4. Install cap assembly.
WARNING
Fuel leaked or spilled onto hot surfaces or
electrical components can cause a fire.
5. Drain moisture and sediment from fuel tank as
required by prevailing conditions.
Seat - Check, Lubricate
Typical Example
Check the operation of the seat adjuster rod. Make
sure that the seat slides freely on its track. Lightly oil
the seat slider tracks if necessary.
To Next Page
