Maintenance Section
161
Inspect Foot Pedal Operation (LP
Engine Only)
1. Verify foot pedal travel is smooth without sticking.
WARNING
When the acceleration pedal harness is
connected or disconnected, should be worked
key OFF condition.
If not, occurred malfunction, can cause the
personal injury.
Inspect Engine for Exhaust Leaks
1. Start the engine and allow it to reach operating
temperatures.
2. Perform visual inspection of exhaust system.
Repair any/all leaks found.
Walk-Around Inspection - Inspect
For maximum service life of the lift truck, make a
thorough walk-around inspection. Look around and
under the truck for such items as loose or missing
bolts, debris or dirt buildup, fuel, oil or coolant leaks
and cut or gouged tires.
Have any repairs made and debris removed, as
needed.
Typical Example
1. Inspect the tires and wheels for cuts, gouges,
foreign objects, inflation pressure and loose or
missing bolts.
2. Inspect the mast and lift chains for wear, broken
links, pins and loose rollers.
3. Inspect the hydraulic system for leaks, worn
hoses or damaged lines.
4. Look for transmission and driveaxle leaks on the
lift truck and on the ground.
Typical Example
5. Inspect the operator's compartment for loose
items and cleanliness.
6. Inspect the instrument panel for broken gauges
and indicator lights.
7. Test the horn and other safety devices for
proper operation.
Typical Example Diesel Engine(3 Speed, Tier-Ⅱ)
Typical Example Diesel Engine(2 Speed, Tier-Ⅱ)
To Next Page
