Operation Section
98
Typical Example Diesel Engine
Typical Example LP Engine
12. Measure the engine crankcase oil level with the
dip stick. Maintain the oil level between the MAX.
and MIN., (or FULL and ADD) notches on the
dip stick.
Typical Example Coolant Water Reservoir Tank
13. Observe the engine coolant level in the coolant
recovery bottle. With the engine cold, maintain
the level to the COLD mark. If the recovery
bottle is empty, also fill the radiator at the top
tank.
Typical Example
14. Observe the fuel level gauge after starting the
truck. Add fuel if necessary
WARNING
Personal injury may occur from accidents
caused by improper seat adjustment.
Always adjust the operator's seat before starting
the lift truck engine.
Seat adjustment must be done at the beginning
of each shift and when operators change.
Typical Example
15. To position the seat, PUSH the lever away from
the seat track and move the seat forward or
backward to a comfortable position.
16. Inspect seat belt for wear and correct operation.
To Next Page
Loading...
