Doosan D80S-7 - Inspect Engine for Exhaust Leaks; Walk-Around Inspection - Inspect

Maintenance Section
219
Inspect Engine for Exhaust Leaks
1. Start the engine and allow it to reach operating
temperatures.
2. Perform visual inspection of exhaust system.
Repair any/all leaks found.
Walk-Around Inspection - Inspect
For maximum service life of the lift truck, make a
thorough walk-around inspection. Look around and
under the truck for such items as loose or missing
bolts, debris or dirt buildup, fuel, oil or coolant leaks
and cut or gouged tires.
Have any repairs made and debris removed, as
needed.
Typical Example
1. Inspect the tires and wheels for cuts, gouges,
foreign objects, inflation pressure and loose or
missing bolts.
2. Inspect the mast and lift chains for wear, broken
links, pins and loose rollers.
3. Inspect the hydraulic system for leaks, worn
hoses or damaged lines.
4. Look for transmission and drive axle leaks on
the lift truck and on the ground.
Typical Example
5. Inspect the operator's compartment for loose
items and cleanliness.
6. Inspect the instrument panel for broken gauges
and indicator lights.
7. Test the horn and other safety devices for
proper operation.
8. Inspect engine compartment for oil, coolant and
fuel leaks.
9. Inspect the cooling system for leaks, worn hoses
and debris buildup.
10. Inspect the carriages, forks or attachments for
wear, damage, and loose or missing bolts.
 Visually inspect forks for cracks, especially
in the heel section, around the mounting
brackets, and all weld areas.
 Inspect for broken or jagged fork tips, bent
or twisted blades and shanks.
 Make sure positioning lock is in place and
working. Lock the forks in position before
using the truck. See Step 7 of "Forks" in
"Every 2000 Service Hours or Yearly".
 Remove all defective forks from service.