Operation Section
92
Lift Control
The forks can be raised or lowered by pulling
backwards or pushing forwards on this lever. The lift
speed is controlled by tilt angle of the lever and
accelerator pedal effort. The lowering speed can be
controlled by tilt angle of the lever. The engine
speed or accelerator pedal has nothing to do with
the lowering speed of the forks.
Tilt Control
The mast can be tilted by operation of this tilt lever.
Pulling on this lever backwards will tilt the mast
backwards, and pushing it forwards will tilt the mast
forwards. The tilt speed can be controlled by tilt
angle of the lever and accelerator pedal effort.
To Next Page
Loading...
