Doosan DL220 - Page 243

OP001017
7-3
Specification
CATEGORY DL220
Tire Size 20.5-25-16PR (L3) 20.5R25 (L3)
Overall Length (A)
7,333 mm
(24' 0")
Overall Width (B)
2,550 mm
(8' 4")
Overall Height (C)
3,255 mm
(10' 8")
3,245 mm
(10' 8")
Bucket Width (D)
2,550 mm
(8' 4")
Wheel Base (E)
2,920 mm
(9' 7")
Tread (F)
1,930 mm
(6' 4")
Ground Clearance (G)
460 mm
(1' 6")
450 mm
(1' 6")
Dump Height, at 45°
(without cutting edge, with base edge) (H)
2,893 mm
(9' 6")
2,883 mm
(9' 6")
Dump Height, at 45° (with cutting edge) (I)
2,835 mm
(9' 4")
2,825 mm
(9' 3")
Dump Reach, at 45°
(without cutting edge, with base edge) (J)
1,036 mm
(3' 5")
1,046 mm
(3' 5")
Dump Reach, at 45° (with cutting edge) (K)
1,060 mm
(3' 6")
1,070 mm
(3' 6")
Digging Depth (L)
90 mm
(4")
100 mm
(4")
Max. Bucket Hinge Height (M)
3,870mm
(12' 8")
3,860mm
(12' 8")
Max. Tilt Angle at Carry Position (N) 48°
Max. Tilt Angle at Ground (O) 44°
Max. Tilt Angle at Fully Raised (P) 58°
Max.Dump Angle at Fully Height (Q) 47°
Turning Radius
(Out Tire Edge) (R)
5,265 mm
(17' 3")
5,275 mm
(17' 4")
(C/Weight Edge) (S)
5,249 mm
(17' 3")
(Bucket Edge) (T)
5,840 mm
(19' 2")