OP001012Safety
1-28
MACHINE OPERATION
Operate While Seated at Operator's
Station Only
Never reach in through a window to work a control. Do not try to
operate wheel loader unless you're in command position -
seated at controls. You should stay alert and focused on your
work at all times. Do not twist out of seat if job activity behind
you (or to the side) requires your attention.
Use a spotter or signal person if you cannot see clearly and
something is happening behind you.
Replace damaged safety labels and lost or damaged operator's
manuals.
Do not let anyone operate machine unless they've been fully
and completely trained, in safety and in operation of the
machine.
Seat Belts Must Be Used at All Times
Whenever engine is running, operator must be seated at the
control station with seat belt properly engaged.
Movement Alarms
If wheel loader is equipped with an audible travel movement
alarm, test alarm on a daily basis. Audible alarm should sound
as soon as travel system is engaged.
IMPORTANT
If you need more information or have any questions or
concerns about safe operating procedures or working the
wheel loader correctly in a particular application or in the
specific conditions of your individual operating
environment, please consult your local DOOSAN
representative.
Figure 15
HAOA151L
Figure 16
To Next Page
Loading...
