Doosan DL220 - Page 77

OP001013
2-15
Operating Controls
Gauges
Warning and Indicator Lights
IMPORTANT
All of gauge and warning lights (except for the turn lights,
high beam light, work light and transmission cutoff light)
turn "ON" for two seconds with a warning buzzer sound
when the starter switch is turned to the "I" (ON) position.
If any light fails to turn "ON" at this time, check the cause
and replace.
Reference
Number
Description
1 Hour Meter
2 Speedometer
3 Fuel Gauge
4
Engine Coolant Temperature
Gauge
5
Transmission Oil Temperature
Gauge
6 Tachometer
7 Transmission Display
Reference
Number
Description
Reference
Number
Description
8
Left Turn and Hazard Warning
Light
9 High Beam Indicator Light
10 Work Light Indicator Light
11 Preheat Indicator Light
12
Engine Coolant Temperature
Warning Light
13 Reverse Fan Indicator Light
14
Engine Oil Pressure Warning
Light
15
F/R (Forward/Reverse) Selector
Indicator Light
16
Electric Steering Select Indicator
Light (Optional)
17
Right Turn and Hazard Warning
Light
18 Battery Warning Light
19 Parking Brake Indicator Light
20
Brake Fluid Pressure Warning
Light
21
Air Cleaner Clogged Warning
Light
22 Engine Warning Light
23 Not Used
24
Emergency Steering Indicator
Light (Optional)
25 Water Separator Light
Reference
Number
Description