Doosan GL08K - Page 106

Maintenance - 100 -
3.3.39 Air compressor & power steering pump
 Couple the power steering oil pump to
the air compressor with the driving dog
engaged.
 Insert the O-ring coated with grease
into the oil outlet of the air compressor.
 Place the air compressor on the
mounting bracket carefully and tighten
the fixing bolts to the specified
torque.(Carefully damage the O-ring)
 Assemble the oil feed pipe.
3.3.40. Alternator
 Install the alternator mounting bracket
and supporter to the cylinder block,
then tighten the fixing bolts.
 Install the alternator with fixing bolts to
the mounting bracket.
3.3.41. Throttle valve
 Install the fixing bolts on the throttle
valve, air pipe and gasket, then tighten
specified torque.
3.3.42. Air conditoner compressor
 Install the air conditioner compressor
bracket on the timing gear case.
 Install the alternator bracket and air
conditioner compressor fixing bolts on
the timing gear case.
 Assemble the air conditioner
compressor.
EB5M3030
EA9M3004
EJ2OM012
Throttle Valve
Gasket
Torque 2.2 kg • m
EQM3104I