Doosan P65 - Maintenance - Compressor Lubrication; Compressor Fluid Selection Guide

MAINTENANCE 35
7/20, P65
TORQUE VALUES
ft lbf Nm
Engine mounts to engine 29-35 39-47
Airend to pivot plate 29-35 39-47
Air filter to bracket 16-20 22-27
Autella clamp to exhaust 9-11 12-15
Baffle to frame 9-11 12-15
Discharge manifold to frame 29-35 39-47
Pulley to flywheel 57-69 77-93
Drop Leg 53-63 72-85
Engine/airend to chassis 54-58 73-78
Band clamp on discharge hose 58-67 78-91
Exhaust flange to manifold 17-21 23-28
Fan guard 9-11 12-15
Fan to hub 12-15 16-20
ft lbf Nm
Lifting bail to frame 29-35 39-47
Band clamp on oil pipes 71-88 96-119
Radiator/Cooler to baffle 9-11 12-15
Running gear front to chassis 63-69 82-93
Running gear rear to chassis 63-69 82-93
Running gear drawbar to axle 29-35 39-47
Main pivot bolt 106-133 143-180
Pivot locking bolt 54-58 73-78
Separator tank cover 40-50 54-68
Separator tank to frame 18-22 24-30
Band clamp on hose 106-133 143-180
Wheel nuts 50-80 67-109