Doremi ShowVault-3 - User Manual

Need help?

Do you have a question about the Doremi ShowVault-3 and is the answer not in the manual?

Summary

Details the purpose of the maintenance manual for specific Doremi digital cinema servers.

Provides contact information for Doremi Labs Technical Support across different regions for assistance.

Specifies a Phillips screwdriver as essential for removing the unit's lid during maintenance.

Identifies pliers as potentially needed for replacing or re-attaching fan shock mounts.

Recommends a soft brush for dust removal from internal components, cautioning against bristle residue.

Requires a small vacuum cleaner, used with a soft brush, for effective dust removal from parts.

Details steps for preparing the unit, including disconnection and lid removal, before maintenance.

Guides on using a soft brush and vacuum cleaner to remove dust from various fans and heatsinks.

Explains how to visually inspect fan shock mounts on the rear panel for proper installation and alignment.

Provides steps to identify noisy fans, isolate them, and recommends replacement if rattling occurs.

Instructs on safely closing the unit lid after maintenance, securing it with screws.

Recommends replacing 2U rear panel and Dolphin fans every 50,000 operating hours or approximately 5 years.

Details the procedure for replacing the Dolphin board battery, emphasizing a 3-minute time limit.

Guides on locating and replacing the motherboard battery, noting its proximity to the South Bridge.

General