Need help?Do you have a question about the Doremi ShowVault-4 and is the answer not in the manual?
Explains the document's objective for preventive maintenance operations on Doremi servers.
Provides contact information for Doremi Labs Technical Support for assistance.
Details the Phillips screwdriver needed for unit lid removal and other tasks.
Describes the use of pliers for replacing or re-attaching fan shock mounts.
Explains the use of a soft brush for dust removal from server components.
Details the small vacuum cleaner for dust removal, used with a soft brush.
Outlines maintenance tasks to be performed every 5,000 operating hours.
Details the steps for preparing the unit before performing maintenance tasks.
Provides instructions for removing dust from internal components using brush and vacuum.
Explains visual inspection of fan shock mounts for correct installation and alignment.
Guides on diagnosing and addressing noise issues from server fans.
Details the procedure for closing the unit lid after maintenance is complete.
Outlines maintenance tasks to be performed every 50,000 operating hours.
Recommends replacing 2U rear panel fans and the Dolphin fan every 50,000 hours.
Details the procedure for replacing the Dolphin board battery every 50,000 hours.
Provides instructions for replacing the motherboard battery for maintenance.
To Next Page
General
