English
Paired devices
View already paired devices.
1. Press Menu Settings Connected devices Bluetooth
Paired devices.
2. See the list of paired devices. Select the device and press to con-
nect/disconnect the device. When a device is connected the icon
is
displayed in the status bar.
3. Select the setting icon on a device from the list and press :
• Name to edit the name of the paired Bluetooth device.
• Mark the type of service that should be enabled.
4. Press OK to save changes.
5. Press Forget to delete the device from the list of paired devices.
Pair new device
Search and pair available Bluetooth devices in your proximity.
1. Press Menu Settings Connected devices Bluetooth
Pair new device.
2. Make sure that the device you want to connect with is visible and in
pairing mode.
3. Wait for the search to display the wanted device to select it and press
to connect. When connecting to another Bluetooth device you
may need to enter a password or confirm a shared key.
Bluetooth address
Here you can see the Bluetooth address of your phone.
USB connection
USB storage is enabled by default and allows a computer or device con-
nected using a USB-cable to access files on this phone. You can change that
with the following settings.
1. Press Menu Settings Connected devices USB.
2. Set the wanted setting:
• Charge this device to only allow charging.
• Transfer files to allow access to the file system of the phone. Ap-
ple’s Mac OS X doesn’t include MTP support. Visit Android File
Transfer to download a file transfer application for Mac OS X.
55
To Next Page
Loading...
