Doro Primo 413 - Page 52

48
7. Enter the date (DD/MM/YYYY) and then press .
8. Using *
and # , choose whether the Change to daylight-
saving time function shall be on or off and press Save.
Note
The change to daylight saving time means summer/winter time.
ON corresponds to summer time. For a manual change-over
you can simply set the clock to one hour forward or one hour
back.
Setting the format for time and date
1. Press Menu, select Settings and press OK.
2. Select Time and Date and press OK.
3. Select Set format and press OK.
4. Set the time format (12 or 24 hour) with
* and # and
press .
5. Set the date format with * and # and press .
6. Select the desired date separation symbol using
* and
# and press OK.