Doro Primo 413 - Restore to Default Settings

60
Note!
With some service providers you first have send an MMS
message before you are able to receive MMS. Send an MMS
with text only to enable the service. Some service providers
have to be contacted first, before the MMS function for your
account is activated. Contact the customer support of your
service provider. To end the setup without saving your settings,
press .
Restoring factory settings
Zurücksetzen des Telefons in den Auslieferungszustand.
1. Press Menu, select Settings and press OK.
2. Select Restore to factory settings and press OK.
3. Enter the current telephone blocking code (by default
0000) and confirm the restoring process.