Doro Primo 413 - Network and Connectivity Settings; Network Selection

52
Network settings
Your telephone selects the network operator automatically if
this operator can be received in your area. If your network
operator is not available you can also use a different network
if your network operator has a corresponding agreement with
other operators. This then is called “Roaming”. You can
obtain more information from your network operator.
1. Press Menu, select Settings and press OK.
2. Select Network settings and press OK.
3. Select Network selection and press OK.
4. Select one of the following options and press OK to con-
firm:
New search – Start a new search if the connection has
been interrupted.
Select network – After a short while, a list of available
networks will be displayed. Select the desired operator
and press OK.
Selection mode
Automatic – The network will be selected automatic-
ally. (default setting).
Manual – The network has to be selected manually.
Select the desired operator with Select network.