Doro Primo 413 - Page 60

56
Changing the PIN
You can change the PIN and PIN2 for your SIM card. For this
purpose, you need the PUK code that was provided with the
documents for your SIM card.
1. Press Menu, select Settings and press OK.
2. Select Security settings and press OK.
3. Select SIM security and press OK
4. Select Change PIN and press OK.
5. Enter the PIN of your SIM card and press OK.
6. Follow the other instructions on the display.
Phone lock
If the telephone lock is activated, you will need the code to
unlock the telephone when switching the phone on. To this
end, you have to enter the blocking code (factory setting is
0000). You can change this blocking code (see below).
1. Press Menu, select Settings and press OK.
2. Select Security settings and press OK.
3. Select Telephone security and press OK.
Select Phone lock and press ON.
4. Enter the blocking code and press OK.
5. The message that follows informs you whether the tele-
phone is locked (Locked) or not (Unlocked).