EasyManua.ls Logo

Dors 500 - Operation Modes

Dors 500
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MACHINE FOR BINDING BANKNOTES AND SECURITIES (BANDING MACHINE) DORS 500
17
MACHINE FOR BINDING BANKNOTES AND SECURITIES (BANDING MACHINE) DORS 500
16
SERVICING
In order to maintain the binding quali
ty, the path and sensors shall be clean
ed of dust and paper debris with a sup
plied brush every 16 hours of opera
tion, and also blow the dust off the
assembly units available at the open
front cover.
The heating element assembly is a dis
posable part, which is subject to natu
ral wear depending on the operation
conditions. The heating element is not
covered by the manufacturer's war
ranty. For longer operational life of
the heating element, use quality tapes
SPECIFICATIONS
The dimensions of a full tape roll shall not
exceed the following:
diameter  150 mm
inner diameter  50 mm
width  40 mm
A minimal duration of a wrapping cycle
of a pack
3.5 seconds
The time period between placing a pack
in the binding position and its release does
not exceed
2 seconds
The number of wrappings before
a regular maintenance
20000
Display
red 4digit LCD
Power supply 220 V ±10%, 50 Hz
Consumption current, not more than 0.7 А
417х231х184
417х231х314
Operating temperature range +10
о
С to +35
о
С
Relative humidity of the air at the
temperature of +25
о
С
40% to 80%
Atmospheric pressure
84 to 107 kPa
(630 to 800 mm Hg)
Weight without package, not more than 7.5 kg
Shipping weight of a delivery set,
not more than
8.2 kg
In order to improve the device quality, specifications and models are subject to change without
notice.
Overall dimensions, not more than
with the height of the loop holders
without the height of the loop holders
only. The unit shall not be operated in
a high dust or humidity content envi
ronment, and the heating element
shall be cleaned of dust, paper debris
and glue remnants on a regular basis.
Use only the brush supplied with this
unit.
Servicing shall be performed after
every 20.000 bindings or once a
month, whatever is earlier.
CAUTION!
The unit cleaning and servicing shall be
performed by service personnel only.
Precious metal content gold 0.004 g