Page 14
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
D14MZ3000 Troubleshooting - Part 3
Step 3: Then, unscrew, remove and set aside.
Step 2: Use the strap wrench (Part #: TOOL01) to loosen
the bell housing.
Step 1: Turn the water off and press the air bleed button on the
top of the bell housing a few times to release the pressure.
This D14MZ3000 - 14 GPM Troubleshooting Part 3 will cover: If the injector isn’t
clicking.
To Next Page
Loading...
