dosatron D8R - SPECIFICATIONS; UNIT SIZE; SHIPPING CONTENTS

30 DOSATRON
SPECIFICATIONS
- Practical operating flow range : Min. 0.5 m
3
/h [2.2 US GPM]
Max.
8 m
3
/h [40 US GPM]
- Operating pressure : 0.15 bar to 8 bar [2.2 - 116 PSI]
- Concentrated additive injection : Min.
1 l/h [0.56 US fl. oz/min]
Max. 160 l/h [0.70 US GPM]
- Maximum operating temperature : 40° C [104° F]
- Externally adjustable injection ratio : 0.2% to 2% [1:500 - 1:50]
- Connections : Ø 40 [1"1/2] NPT/BSP
- Hydraulic motor capacity : About 1.7 l [0.45 US Gallons] for every 2 clicks of
the piston
- Self-priming : 4 meters
NOTE : THE DOSATRON IS NOT PRESET, see chapter ADJUSTING THE
INJECTION RATE
UNIT SIZE
Diameter : 18.4 cm [7 1/4"]
Total height of the DOSATRON : 58 cm [22 7/8"]
Width : 30 cm [11 4/5"]
Weight : 4 kg approx. [~ 8.8 US lbs]
SHIPPING CONTENTS
- 1 DOSATRON
- 1 mounting bracket for DOSATRON
- 1 suction tube of concentrated additive
- 1 by-pass tube Ø 6 x 9 [1/4" ID x 3/8" OD]
- 1 strainer
- 1 owner's manual
PACKAGE SIZE
60 x 36.5 x 24 cm [23 5/8" x 14 3/8" x 9 7/16"]
PACKAGE WEIGHT
5.5 kg approx. [~ 12.15 US lbs]