Level
Product Current product height
Water Current water height
Safe capacity Refer to the configuration
Maximum height Tank height (refer to the strapping table).
NOTE: The density data in the table that follows will show only if a Density Measurement
sensor is installed.
Density
Density The density at current temperature
Weight The weight of the product calculated by the measured density
Temperature
Current The current product temperature.
Compensated
The temperature setting that is used for volume compensation (refer to the con-
figuration).
7.1.1 Status Icons
Status OK (Green) No Alarm
l The "Traffic Light" is green.
l There are no Alarms.
l The NO ALARM button is "grayed out."
M2052-EU Rev.: 1 Dover Fueling Solutions
Page 16
To Next Page
Loading...
