Section 4 General Description
This console is used to monitor probe levels and gives tank alarm notifications. The console can hold up to
16 on-board probes, four (4) on-board relays with six (6) inputs and an external expansion module that can
hold up to four (4) expansion cards.
NOTE: A maximum of two (2) MagDirects with 8 probes each can be added.
NOTE: Each expansion card can have 8 relay outputs, 8 digital inputs or 4-20mA. These
cards can be put together so that the system can have 32 relays and 0 inputs, 32 inputs and 0
relays and a mixture of both in increments of 8.
The console can interface with a site's FCC/POS through serial or Ethernet connection.
The console has a resistive type touchscreen that can be used with fingers (also with gloves), stylus pens for
touchscreens and other applicable tools. To use the screen it is necessary to contact the screen and apply a
light force.
M2052-EU Rev.: 1 Dover Fueling Solutions
Page 9
To Next Page
Loading...
