Need help?Do you have a question about the Dover ProGauge MagLink LX Plus and is the answer not in the manual?
General| Brand | Dover |
|---|---|
| Model | ProGauge MagLink LX Plus |
| Category | Music Mixer |
| Language | English |
Crucial safety warnings before commencing installation.
Guidelines for choosing a suitable and safe location for installation.
Instructions for correctly making electrical connections to the unit.
Step-by-step instructions for the physical installation process.
Identification and description of components on the rear panel.
Identification and description of components on the front panel.
Information about the SD card's role in system operation and storage.
Safety precautions and procedures for battery handling and replacement.
List of devices compatible for connection to the ISB-1W barrier.
Details on connecting devices to the Intrinsically Safe Barrier.
Explanation of the status indicators on the auxiliary board.
Best practices for positioning probes within the tank for accurate measurement.
Method for calculating product offset in non-centered or tilted tank installations.
Procedures for installing essential tank interface components like risers and boxes.
Requirements and procedures for installing conduit seal fittings for safety.
Specific steps for installing probes into underground storage tanks.
Description of different probe float types and their applications.
Technical specifications and operating parameters for the 924B probe.
Technical details for the DMP-IS probe's serial communication features.
Step-by-step instructions for installing the DMP probe.
Guide for assembling and adjusting spacers for DMP probe installation.
Wiring instructions for DMP probe cables to the LX Plus I.S. barrier.
Wiring instructions for DMP probe cables to the LX Plus I.S. barrier.
Instructions for wiring DMP probes using Belden 88760.
Setting tank thresholds for Density Measurement Float configuration.
Procedures for installing the DFS Density Measurement Float on a DMP probe.
Setting tank thresholds specifically for the DMP Density Measurement Float.
Calibration process for the DMP Density Measurement Float upon first installation.
Explanation of IntelliSense technology for automatic sensor detection.
Using probes and sensors on a single cable with Multi-Drop technology.
List of OPW-FMS Smart Sensors supported by the LX Plus console.
Installation details for interstitial level sensors.
Description and installation of single-level sump sensors.
Installation and function of dual float sensors for sumps.
Installation and function of discriminating sensors for sumps.
Installation and function of dual float sensors for brine reservoirs.
Sensor for detecting hydrocarbon and water in interstitial spaces.
Sensor for detecting hydrocarbon and water in monitoring wells.
Sensor for detecting hydrocarbon vapors in wells and interstitial areas.
Optical sensor for liquid detection in interstitial areas.
Wiring details for connecting to TOKHEIM FUEL POS / DIALOG systems.
Wiring details for connecting to Wayne Fusion management systems.
Wiring details for connecting to GILBARCO Fuel Management Systems.
To Next Page
