Section 14 Sensor Support
The LX Plus console supports OPW-FMS Smart Sensors that use IntelliSense
™
Technology. The OPW
smart sensors can monitor all contained areas of the fuel-storage system: tank interstice, piping sumps, STP
containment sumps, dispenser sumps and pans, monitoring wells and site locations. Sensors connected to
the I.S. barrier are automatically detected and identified by the console.
14.1 IntelliSense
™
Technology
This technology lets the console's internal I.S. barrier automatically find the sensor's connection, type and
status. IntelliSense will minimize user entry errors and identify hardware issues with minimal troubleshooting.
14.2 Mixed Multi-Drop Installation
The LX Plus Mixed Multi-Drop technology can run probes and sensors on one cable back to the tank
gauge.
IMPORTANT: Seal packs and weatherproof junction boxes are REQUIRED with ALL I.S. field
connections for North American installations.
14.3 Smart Sensors
Part Number Description
30-0232-DH-10 Discriminating Dispenser Sump Sensor
30-0232-DH-20 Discriminating STP Sump Sensor
30-0236-LW Discriminating Interstitial Sensor (Optical)
30-0234-HW-06/15/20 Hydrocarbon Liquid Sensor with water indicator (6, 15 and 24 ft. lengths)
30-0234-HW-01 Interstitial Hydrocarbon Liquid with water indicator
30-0231-S Interstitial Sensor-Float Switch – (Small Plastic)
30-0231-L Sump Sensor-Float Switch – (Large Plastic)
M2050-PLUS MagLink LX Plus Installation Manual | Dover Fueling Solutions 59
To Next Page
Loading...
