14.5 Single Level Sump Sensor-Float Switch
Smart Sensor Equipped with Intellisense™ Technology
30-0231-L
Description
The primary function of the single-level sensor is to sense liquid in sumps, fuel dispenser pans and other
locations where there is liquid that could indicate that a leak has occurred. A float inside the sensor moves up
when the liquid level increases. The float switch will operate and cause an alarm condition in the controller. If
there is a break in the cable it will cause an alarm condition in the system.
Specifications
Primary Use(s): Sumps and Fuel Dispenser Pans
Detects: Liquid
Operating Temperature: -40°C to +70°C (-40°F to 158°F)
Dimensions: Diameter: 7.4 cm (2.90 inches), 9.5 cm (3.70 inches)
Cable Requirements:
Belden #88760 or Alpha #55371
3.6m (12 feet) of gas & oil resistant cable to the inline ISIM
+ 1.3m (4 feet) ISIM tail.
M2050-PLUS MagLink LX Plus Installation Manual | Dover Fueling Solutions 67
To Next Page
Loading...
