Section 6 CAN/CSA C22.3 NO. 61010-1-12
Clause
Ref
STATEMENTS/INFORMATION REQUIRED IN MANUAL Yes No
5.4.1h Instructions for lifting and carrying X
5.4.2 e Ingress Protection (IP) rating and any mounting arrangements required X
5.4.2 f Details on an impact rating with an IK code (if less than 5J) X
5.4.3 a Assembly, location and mounting requirements X
5.4.3 b Instructions for protective earthing X
5.4.3 c Connections to the supply X
5.4.3 d
For permanently connected equipment; supply wiring requirements and
requirements for any external switch or circuit-breaker and external over-
current protection devices and a recommendation that the switch or circuit-
breaker be near the equipment
X
5.4.3 e Ventilation requirements X
5.4.3 f Requirements and safety characteristics for special external services X
5.4.4 b
Instructions not to position the equipment so that it is difficult to operate the
disconnecting device
X
5.4.4 c
Instructions for interconnection to accessories and other equipment, includ-
ing indication of suitable accessories, detachable parts and any special
materials
X
5.4.4d Specifications of limits for intermittent operation X
5.4.4 f Instructions for replacement of consumable materials X
5.4.4 g Instructions for cleaning and decontamination X
5.4.4 h
A statement listing potentially poisonous or injurious substances that can be
liberated from the equipment, and possible quantities
X
5.4.4 i
Detailed instructions about risk reduction procedures relating to flammable
liquids
X
5.4.4 j Details of methods of reducing the risks of burns from surfaces X
5.4.4
There shall be a statement in the instruction which states that if the equip-
ment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired
X
5.4.5
Instruction against replacing detachable mains supply cords by inadequately
rated cords
X
5.4.5 The specific replaceable battery type shall be stated X
M2050-PLUS MagLink LX Plus Installation Manual | Dover Fueling Solutions 14
To Next Page
Loading...
