Dover ProGauge MagLink LX - Page 26

l Enter the new value.
l Click OK to save the value.
When you have completed all necessary changes, Click Save.
7.10.2 Tank Configuration
Push the Tank icon on the Configuration Menu and the "System Settings" screen will come into view.
You can make changes to Tank configuration parameters in this screen (see the image above)
When you have completed all necessary changes, Click Save.
Click the --> button to go to the "Protocol Settings" screen. You can make changes to the Serial and TCP/IP
port parameters in this screen (see the image below).
Push the Exit button to navigate from this screen to go back to the Configuration menu.
M2052-EU Rev.: 1 Dover Fueling Solutions
Page 26