Need help?Do you have a question about the Dowell iPack C6.5 and is the answer not in the manual?
Shows safety symbols, meanings, and certification marks for proper handling.
Details risks of leakage, fire, shock, damage, and necessary preventive measures.
Provides recommended actions for handling battery leakage, fire, wet conditions, and damage events.
Illustrates four typical scenarios for using the battery in residential energy storage systems.
Highlights performance, cycle life, BMS monitoring, alarms, and parallel connection capabilities.
Details the battery's physical dimensions, terminals, and indicator lights with port descriptions.
Lists key specifications including voltage, current, power, temperature limits, and safety certifications.
Provides guidelines for storing the battery, including temperature, humidity, and placement requirements.
Outlines procedures and restrictions for safely transporting the battery, including UN classification and handling.
Specifies conditions for indoor/outdoor installation, orientation, and environmental factors for safe setup.
Details pre-installation checks, accessory list, and steps for wall mounting the battery securely.
Outlines the steps for installing the battery in a floor-standing configuration safely and correctly.
Details the specifications and models for power terminals and network port connections for the battery.
Guides on making power and network cables, including stripping, sealing, and crimping procedures.
Provides step-by-step instructions for connecting a single battery, including grounding and power/network cable connections.
Explains how to connect multiple batteries in parallel, covering voltage checks, network, and power cable routing.
Describes methods to power on the battery using the power button or an activation signal from the PCS.
Details the procedure for powering off the battery by holding the power button for a specified duration.
Lists necessary preparations and precautions before performing battery maintenance or replacement.
Provides step-by-step instructions for safely replacing the battery, including handling precautions.
Guides on installing software and upgrading the battery firmware using a computer and specific tools.
Lists common battery statuses, information, and LED indications for diagnosing potential issues.
To Next Page
General