A17
EXAMPLE 2 (Cooking program with steam cycle)
-For menu #2, we will program it so that we have a steam injection of 20 seconds, a cooking time of
20 minutes at 375°F followed by a 15 seconds buzzer.
To access the programming mode:
• Press both arrows simultaneously for 5 seconds. Both lights light up to show that the
programming mode is working.
• Select the menu number (Ex. #2)
Step #1 Suggested values
SP1 appears.
Use the arrows to adjust to the desired temperature (375°F)
Press on the number of the menu to confirm (ex. # 2)
t1 appears
Use the arrows to select the desired timing (00:20)
Press on the number of the menu to confirm (ex. # 2)
E1 appears
Use the arrows to select the appropriate code (0001 for the steam)
Press on the number of the menu to confirm (ex. # 2)
Step #2 Suggested values
SP2 appears.
Use the arrows to adjust to the desired temperature (375°F)
Press on the number of the menu to confirm (ex. # 2)
t2 appears
Use the arrows to select the desired timing (20:00)
Press on the number of the menu to confirm (ex. # 2)
E2 appears
Use the arrows to select the appropriate code (0000 for no event)
Press on the number of the menu to confirm (ex. # 2)
To Next Page
Loading...
