A14
OVEN MAINTENANCE AND CLEANING
MAINTENANCE OF THE BURNER
• Once a year, you should ask a certified technician to make a tune up.
Make sure everything works properly, verify and clean especially:
1. The gas mixer air inlet.
2. The spark rod and porcelain insulators.
3. The flame detection rod.
4. Verify the burner input pressure.
5. Verify every adjustments.
6. Clean every moving pieces.
PIZ6G PIZ3G
Step by step Recommendations
Clean the inside of the oven with
water and soap.
Take out the grills (the grills of
the oven could be cleaned with
“Easy-Off”).
We recommend and sell:
Dirt Buster III : Action foam cleaner
CHEMCO
Part number : NEB201
After cleaning the inside of the
oven, apply a silicone base oven
protector. It avoids food from
sticking to the metal.
We recommend and sell:
316 Silicone base protector and
lubricant for oven
Dow Corning
Part number : EXS400
Clean the oven windows with
products like Brasso or
equivalents. They are copper
cleaners but good for this use.
We recommend and sell:
Wright’s: Cream copper cleaner
J.A. Wright & Co.
Part number : EXC300
Clean the oven exterior with a
stainless steel cleaner.
We recommend and sell:
Stainless steel cleaner.
SANY or CURTIS (comestible)
Part number : NES201
3
4
1
2
1
4
3
2
TO REPLACE
SILICONE BUMPER
PART NUMBER
40000030 (QUE500)
CLEAN UNDER
DOOR WEIGHT
UNSCREW THE 7 SCREWS
TO REMOVE THE PANEL
To Next Page
Loading...
Need help?
General
