Auto Cool Down Cycle
The SWITCH may go in to a cooling cycle if the base unit becomes too warm to operate.
The cool down cycle is indicated by the front LEDs illuminating Blue in a cascading pattern.
Minimum cool down cycle is 5 seconds.
The automatic cool down cycle length is determined by the internal temperature of the unit. The warmer the
unit, the longer the cool down. This feature prevents the unit from ever overheating and causing damage to the
advanced electronics.
Maximum cool down cycle time is 4 minutes.
If cool down cycle is interrupted by powering the Switch Down, then cool down cycle will reset upon powering
the Switch back on.
Induction Cups
Ceramic Induction Cups should only be removed after they have cooled to a safe temperature.
To Next Page
Loading...
