DR
®
TRIMMER/MOWER
™
Assembly & Operating Instructions42
Daily Check List for the DR
®
TRIMMER/MOWER
™
To help maintain your DR
®
for optimum performance, we recommend you
follow this check list each time you use it.
4 GAS: Fill the gas tank with clean, fresh, unleaded gas. Be careful not to spill gas
on the engine shield. Gasoline will cloud the acrylic. If gas does spill on the
shield, rinse it immediately with soap and water.
4 OIL: Check the oil level and add more if necessary (add oil to the level indicated
on the dip stick—do not overfill). Use SAE 30 detergent oil.
4 SPARK PLUG: Clean or replace the spark plug.
4 AIR FILTER: A clean air filter will mean a much easier-starting and better
running engine. Please see your engine manufacturer's manual for instructions on
cleaning or replacing your air filter.
4 ENGINE AIR COOLING SYSTEM: It is very important to keep the engine clean
of debris. Remove grass and other built-up materials from the air intake screen,
blower housing, and cooling fins regularly. A dirty engine retains heat and can
cause damage to the internal engine parts.
4 BELT: Check the belt for wear, proper alignment and tension.
4 CUTTING CORDS: Replace broken or frayed cords.
4 MOW-BALL
™
SUPPORT and CUTTING HEIGHT ADJUSTMENT DISKS:
Check the Mow-Ball
™
Support and cutting height adjustment disks for wear.
Make sure the Mow-Ball
™
Support and cutting height adjustment disks are lined
up with the notches in the trimmer head plate.
COUNTRY HOME PRODUCTS
®
Meigs Road, P.O. Box 25, Vergennes, Vermont 05491
1(800)DR-OWNER(376-9637)
©1999 CHP, Inc. 135711
CODE: 30161X
To Previous Page
Loading...
