DR PRO - Trimmer Parts & Components

DR
®
TRIMMER/MOWER
™
Assembly & Operating Instructions 7
Trimmer Parts & Components
The following parts and assembly components should be in your DR
®
TRIMMER/MOWER
™
package. Please check your shipping box(es) and parts package(s) for the items listed below. If
your shipment is incomplete or if you have any questions, please call us TOLL-FREE 1(800)DR-
OWNER (376-9637).
Assembly Components:
1—Upper Handlebar [#117771]
1—Lower Handlebar [#117741]
1—Axle [#114261]
1—Rubber Stone Guard [#116801]
1—PTA
™
Lever [#118221]
1—Acrylic Shield Assembly [#120521]
2—Wheels [#121321, or #121761]
Parts Bag Contents:
2—Wheel Retainer Rings [#119551]
2—Handlebar Knobs [#118181]
2—Stone Guard Clamps [#115641]
2—Handlebar Bolts 1/4"-20 x 1-1/2" [#114611]
1—Black Nylon Axle Washer [#121521]
4—5/16" Washers [#121691]
5—Lock Nuts 5/16"-18 [#110761]
2—Set Screws 1/4"-20 Square Head [#120161]
7—Slotted Hex Head Bolts 10-24 x 5/8" [#114781]
7—Lock Nuts 10-24 [#118731]
2—U-Bolts [#114851]
1—PTA
™
Lever Grip [#117491]
Please refer to Figure 1 on the next page when preparing to assemble your DR
®
TRIMMER/MOWER
™
. We recommend laying the parts out in sets, as we have drawn them, before
assembly.