Dräger caleo - Page 109

Operation
109
Operating Instructions Caleo, Software 2.n
Configuration
Viewing O
2 sensor information*
From the configuration mode selection menu:
z Turn and press rotary knob to select "O2 sensor
information".
The screen displays the following information for the
O
2 sensors used:
– Date of manufacture
– Date of last calibration
– Date of next calibration.
Viewing software information
From the configuration mode selection menu:
z Turn and press rotary knob to select "info screen".
– The software version and the number of operating hours are
displayed on screen. Where applicable, this screen contains
additional information on service intervals.
Further information on this subject is provided in the service
documentation.
1 Press soft key to return to configuration mode selection
menu,
or
2 press rotary knob.
– The display returns to the configuration mode selection
menu (see page 104).
* Available option
305
075
165
D
1
2