D-58067-2012
Disassembly
Remove all hoses, cables
and the absorber, lift off the
breathing system.
Mount the breathing system,
connect all hoses, cables
and the absorber.
Unscrew CLIC adapter (optional)
or absorber canister. Inspect the
CLIC adapter seal.
Make sure all seals are in place.
Screw on CLIC adapter (optional)
or absorber canister.
Remove inspiratory and
expiratory valve.
Loosen and pull out expiratory
port; pull out flow sensor.
Remove flow-sensor guard.
Remove waste-gas port.
Mount waste-gas port.
Remove hook for gas sample
line (optional).
Remove cover of ventilator
chamber, remove ventilator
diaphragm.
Assembly
Remove cleaning disc from
the adapter. Close adapter
until it snaps.
Insert cleaning disc into
the adapter. Close adapter
until it snaps.
Remove APL-valve.
91 02 535 | 16.08-1 | HQ | PP | Subject to modifications | © 2016 Drägerwerk AG & Co. KGaA
Mount hook for gas sample line
(optional).
Mount APL-valve.
Attach flow-sensor guard. Insert
flow sensor, insert and tighten
expiratory port.
Mount inspiratory and expiratory
valve.
Insert ventilator diaphragm
and mount cover of
ventilator chamber.
Dräger Fabius Family
Compact Breathing System
Disassembly/Assembly
To Next Page
Need help?
General
