Infinity M300/M300+ Features for VG2.4
14 Supplement – Infinity M300 and M300+ Series – VG2.4
To maintain a clear signal, change electrodes every 24 to 48 hours or more often when the following
occurs:
– ECG signal degradation
– Excessive patient perspiration
– Skin irritation
Consider the following when selecting electrode sites:
– Surgery – keep electrodes as far from the surgical site as possible, while maintaining a clinically useful
lead configuration.
– Burn patients – use sterile electrodes. Clean the equipment thoroughly and follow hospital infection
control procedures.
ECG precautions
WARNING
Do not rely solely on the ECG when monitoring seizure-prone patients. Electrical artifacts of non-
cardiac origin, such as seizure, may prevent detection of certain arrhythmias.
To Next Page
Loading...
