EasyManua.ls Logo

Dräger Vamos - Anesthetic Agent Selection

Dräger Vamos
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation in Measurement Mode
19
Operating Instructions Vamos, 1. US ed.
Switching On
Vamos initially displays the selection menu for the volatile
anesthetic agents and prompts the user to select the
anesthetic agent used.
The previously selected anesthetic agent is marked with an
arrow (example:
jHal).
Turn dial knob to select the anesthetic agent you are using.
Press dial knob to confirm.
If you wish to measure a previously selected anesthetic agent
again:
Simply press dial knob to confirm.
If Vamos has been switched off for less than 3 minutes it
automatically switches to measurement mode after the start-up
and test routines. In this case the » « key does not have to be
pressed. Vamos starts measurement with all parameters set as
before it was switched off.
The CO
2 concentration is represented as a breath by breath
real-time waveform.
Below this waveform, the following numeric values are
displayed:
Inspiratory concentration of the volatile anesthetic agent
used,
End-tidal concentration of the volatile anesthetic agent
used,
Inspiratory N
2O concentration FiN2O,
End-tidal N2O concentration FetN2O,
Inspiratory CO
2 concentration FiCO2 ,
End-tidal CO
2 concentration FetCO2.
To change to other units of measurement for CO
2 and a
different scale for the real-time waveform, see “Selecting CO
2
Unit of Measurement/CO
2 Scale” on page 26.
WARNING !
The Vamos monitor cannot automatically recognize the
anesthetic agent used. The respective anesthetic agent
must always be set manually.
Otherwise, incorrect measurements will result.
WARNING !
The Vamos monitor cannot recognize anesthetic gas
mixtures. Consequently, measurements will be incorrect
if more than one anesthetic agent are present of one
time!
Agent exit
Hal
Enf
Iso
Fi
Fet
Hal
[%]
N2O
[%]
CO2
[%]
[%]
[1/min]
Des
SpO2
Pulse
98
110
Sev
CO2
SpO2
Pulse
98
110
Fi
Fet
Hal
[%]
N2O
[%]
CO2
[%]
[1/min]
[%]
0.6
0.1
30
25
0.0
4.5
10
0
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
RETURN TO CD-ROM TABLE OF CONTENTS

Table of Contents

Related product manuals