User Manual for LoRaWAN End Nodes - LHT65N LoRaWAN Temperature & Humidity Sensor Manual
3. Sensorsand Accessories
3.1E2 Extension Cable
1m long breakout cable for LHT65N. Features:
• Use for AT
Command，
works for both LHT52/LHT65N
• Update firmware for LHT65N, works for both LHT52/LHT65N
• Supports ADC mode to monitor external ADC
• Supports Interrupt mode
• Exposed All pins from the LHT65N Type-C connector.
3.2E3 Temperature Probe
Page 26 / 56 - last modified by Bei Jinggeng on 2022/07/06 13:48
To Next Page
Loading...
Need help?
General
