Dragino LHT65N - Analyzing LHT65 N Battery Life; Frequently Asked Questions (FAQ); Using AT Commands with LHT65 N

User Manual for LoRaWAN End Nodes - LHT65N LoRaWAN Temperature & Humidity Sensor Manual
5.3 Battery Life Analyze
Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to
calculate the estimated battery life:
https://www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/
DRAGINO_Battery_Life_Guide.pdf

A full detail test report for LHT65N on different frequency can be found at : https://www.dropbox.com/sh/
r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0
6. FAQ
6.1 How to use AT Command?
LHT65N supports AT Command set.User can use a USB to TTL adapter plus the Program Cable to connect to
LHT65 for using AT command, as below.
Page 35 / 56 - last modified by Bei Jinggeng on 2022/07/06 13:48