34
Database
Max DB File Seconds – Set the duration of the data file in hours, days,
weeks, or months from a dropdown list. The default setting is 31 days.
You can also enter a custom setting in seconds (<1hr). This setting is
how long the instrument will record until a new data file is automatically
created. A new data file will automatically be created when the duration
is exceeded.
Max DB Keep – Set the duration of time that the data file will be retained
in memory in days, weeks, months, or years from a dropdown list. You
can also enter a custom setting in minutes. This setting is the length of
time that the data file is retained in instrument memory before it is
marked for deletion from the database automatically. Data files older
than this setting will be automatically deleted to free up space for new
recordings.
BACnet
BACnet Enable – Checkbox enable/disable.
BACnet Device ID – Enter a valid BACnet Device ID for the instrument.
Modbus TCP
Modbus Enable – Checkbox enable/disable.
Modbus Port – Enter a valid modbus port. The default Modbus port is
502.
Submit Changes
When the Instrument Setups have been completed, click the Submit
Changes button to save the settings. Click the Discard Changes button
to discard the settings.
To Next Page
Loading...