To Next Page
S
Sherry Booth DDSAug 11, 2025
Why does my Draper 98678 have poor pressure?
- CCarol SchmidtAug 11, 2025
If your Draper Pressure Washer has poor pressure, the issue might be water leaks. Inspect all connections and tighten them to resolve this issue.
Why does my Draper 98678 have poor pressure?
If your Draper Pressure Washer has poor pressure, the issue might be water leaks. Inspect all connections and tighten them to resolve this issue.
What to do if my Draper 98678 has a bad spray pattern?
If you notice a bad spray pattern from your Draper Pressure Washer, the nozzle might be blocked. Try unblocking the nozzle to restore the correct spray pattern.
What to do if my Draper 98678 pump fails to start?
If the pump on your Draper Pressure Washer fails to start, here are a couple of things to check: * First, the plug fuse might be blown. Replace the fuse. * Second, the cable might be damaged. In this case, have the cable replaced by a qualified repair agent.
How to fix motor pulsing on Draper Pressure Washer?
If the motor of your Draper Pressure Washer is pulsing, it could be due to air in the system. Bleed the gun to remove the air; see p.14 for instructions.
Why does my Draper 98678 pump start and stop with the trigger?
The pump starting and stopping with the trigger operation on your Draper Pressure Washer is the correct operation of the total stop device. There is no issue.
General| Brand | Draper |
|---|---|
| Model | 98678 |
| Category | Pressure Washer |
| Language | English |
